Remember Me
Conext / Schneider XW+ & SW series, 600 VDC input, 80A MPPT high voltage charge controller, for 24 / 48 VDC batteries, 865-1032
Conext / Schneider XW+ & SW series AGS, automatic generator start, 865-1060-01
Conext / Schneider XW+ series SCP, system control panel, 865-1050-01
Conext / Schneider XW+ 5548 NA inverter/charger, 5500 Watt, 48 VDC, 120/240 VAC, 110A charger, 865-5548-01
Conext / Schneider XW+ 6848 NA inverter/charger, 6800 Watt, 48 VDC, 120/240 VAC, 140A charger, 865-6848-01
Conext / Schneider XW+ battery monitor, 865-1080-01
Conext / Schneider XW+ series ComBox, Web communications box, 865-1058
Conext / Schneider XW+ & SW series, 150 VDC input, 60A MPPT charge controller, for 12 – 60 VDC batteries, 865‑1030‑1
Enphase X-IQ-AM1-240-3, 4-string AC Combiner with IQ Envoy, 80A, 240V AC split-phase
Magnum Energy PT-100, MPPT charge controller 100A, 200VDC, 12-24-48VDC output, GFDI, AFCI
MidNite Solar Classic 150, MPPT charge controller, 150 VDC in, 96A out, 12 to 72V battery charging, PV – wind – hydro modes
MidNite Solar Classic 200, MPPT charge controller, 200 VDC in, 79A out, 12 to 72V battery charging, PV – wind – hydro modes
MidNite Solar Classic 250, MPPT charge controller, 250 VDC in, 63A out, 12 to 72V battery charging, PV – wind – hydro modes
Midnite Solar MN3-015-1, a tin plated copper plate used on MNSHUNT shunts
MidNite Solar MNBABYBOX, an aluminum enclosure for up to four 13mm wide DIN-rail breakers
MidNite Solar MNBACKPLATE, a 16 gauge, grey steel plate that accepts up to two E-Panels and has rear cover plates for wire management
MidNite Solar MNBCM, battery capacity meter for 12, 24, 36, and 48 volt
MidNite Solar MNBIGBABY, an aluminum enclosure for up to four 13 mm wide DIN rail breakers, twice the wiring size of MNBABYBOX
Midnite Solar MNBIRDHOUSE1-GRAY, a Birdhouse emergency disconnect switch in gray
Midnite Solar MNBIRDHOUSE1-RED, a Birdhouse emergency disconnect switch in red
MidNite Solar MNBTS, battery temperature sensor for MidNite produts, 15-foot cable
MidNite Solar MNCCCK, a close nipple kit for charge controllers
MidNite Solar, MNCCPDual, dual Classic mounting plates used with MidNite E-Panels
MidNite Solar MNCLIP4KAC, 4kW AC Clipper for 3-phase wind or hydro turbine, designed to work with the MidNite Solar Classic
MidNite Solar MNDC-C, an aluminum breaker box with 5 DIN rail breaker slots or 3 panel mount breaker slots
MidNite Solar MNDC125, a 125A/125 VDC white, powder coated aluminum breaker box with 5 or 10 DIN rail breaker slots or 3 panel mount breaker slots
MidNite Solar MNDC15, a general use enclosure for 15 panel mount type breakers from 5 – 100A as well as a single 175 or 250A breaker
MidNite Solar MNDISCOPSB, a rapid shutdown PSB for MidNite disconnecting combiners in connection with the MNBIRDHOUSE
MidNite Solar MNE175STM-240, a 120/240VAC, grey, steel E-Panel for Magnum PAE inverter with a 175A/125VDC inverter breaker
MidNite Solar MNE175XWP-SINGLE, a rapid shut down compliant E-Panel that includes a remote trip breaker upgrade and a battery disconnect module for use with the Birdhouse
