Remember Me
Kinetic KAGMxx-G, adjustable ground Mount, available from 6 through 46 modules, 20-45-60-degree tilt-angle, for 60 & 72 cell modules in portrait, galvanized steel
Kinetic KAGMM-G, micro-inverter mount for Hat Rail – steel ground mounts (each)
Kinetic KBFGML-GA, fixed ground mount, 40-degree, landscape, 60 & 72 cell modules, galvanized steel
Kinetic KBFGMP-GA, fixed ground mount, 40-degree, portrait, 60 & 72 cell modules, galvanized steel
Kinetic 4″ steel roof mounting plate, includes stainless lag screws
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10’8″ and 14’2″, holds between 3 or 4 solar panels depending on length (in portrait).
Kinetic Aerocompact flat roof/ballasted racking 10-15-20 degrees
Clearance: Kinetic Cable Management Kit for 48″ Centers, KCMK48-C (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
Kinetic Flashing Kit with two 4″ self-drilling lag bolts, KFLK-42S (each)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
Kinetic KHSG-J stainless steel “J” hook for use with Squirrel Guard, 100 pack, 1 per foot needed
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8″ wide, KHSG-M, 100 ft roll
