Remember Me
Copper wire 10 AWG RW90, 600V 30A, stranded, black or red, for wet/dry locations (sold per foot)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Copper wire 8 AWG RW90, 600V 55A, stranded, black & red, for wet/dry locations (sold per foot)
Copper wire 6 AWG RW90, 600V 75A, stranded, black or green (ground wire), for wet/dry locations (sold per foot)
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
2 AWG – 4/0 AWG welding cable, finely stranded copper, 600V, 130A – 260A, black or red (sold per foot)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic Mid Clamp – 30 – 46mm – with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Copper wire 12 AWG RW90, 600V 20A, stranded, black or red, for wet/dry locations (sold per foot)
QuickCable MAX Lug, tin-plated copper lug, 4 AWG through 4/0 AWG, 3/8″ hole, cUL listed
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic Mid Clamp – 30 – 46mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each)
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10’8″ to 21’4″, holds between 3 to 6 solar panels depending on length (in portrait).
Copper wire 4 AWG RW90, 600V 95A, stranded, black, for wet/dry locations (sold per foot)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Blue Sea MRBF terminal fuse, 40 – 300 Amp, 58 Volt max.
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
MidNite Solar MNEPV, DC-rated breakers, 1 through 100 Amp available, 150 VDC rated, DIN rail mount breaker, 13mm & 26mm wide
Aluminum lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
Multi-Contact 32.0716 PV-BVK4, sealing cap for MC4 female
Multi-Contact 32.0717 PV-SVK4, sealing cap for MC4 male
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
