Remember Me
2 Panel Cottage Kit (820 Watt PV) – 1600 Watt Inverter
4 Panel Cottage Kit (1,610 Watt PV) – 2400 Watt Inverter
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Midnite Solar MNPV6, 6-string combiner for 6 x 150 VDC breakers or 4 x 600 VDC fuse holders, NEMA-3R
Wohner 31110.000, midget fuse holder for DIN rail, 30A, 600 Volt AC or DC maximum, for combiners
Littelfuse JLLN200, 200A, 300V AC, 125V DC, class T fuse (bolts directly to battery terminal)
Littelfuse JLLN300, 300A, 300V AC, 125V DC, class T fuse (bolts directly to battery terminal)
Trojan T-105 6V battery, 225Ah/20h capacity, T2 technology, ELPT/stud terminals, 1 + 1 years warranty
Trojan L16E-AC 6V battery, 370Ah/20h capacity, T2 technology, L terminals, 1 + 1 years warranty
Trojan L16H-AC 6V battery, 435Ah/20h capacity, T2 technology, stud terminals, 1 + 1 years warranty
Trojan 6V-GEL battery, 6V deep cycle GEL, 189Ah/20h, stud terminals, 1 + 1 years warranty
Trojan 31-GEL battery, 12V deep cycle GEL, 102Ah/20h, L terminals, 1 + 1 years warranty
Inverter cables 2/0 AWG pair, flexible wire, red/black with 3/8″ lugs
Inverter cables 4/0 AWG pair, flexible wire, red/black with 3/8″ lugs
MidNite Solar Classic 150, MPPT charge controller, 150 VDC in, 96A out, 12 to 72V battery charging, PV – wind – hydro modes
MidNite Solar Classic 200, MPPT charge controller, 200 VDC in, 79A out, 12 to 72V battery charging, PV – wind – hydro modes
Magnum MS2024-L-U, a 2000W 24V pure sine inverter/charger, 60A PFC charger
Magnum MS4024-U, a 4000W 24V pure sine inverter/charger, 105A PFC charger
Magnum MS4024PAE, 4000W 24V pure sine inverter/charger, 105A PFC charger, 120V/240V output
Magnum MS4448PAE, a 4400W 48V pure sine inverter/charger, 60A PFC charger, 120V/240V output
Delta LA303 surge arrestor, 4-wire AC (for 120V or 240V split-phase)
MidNite Solar MNSPD-115, 115 Vcc lightning arrestor (for battery circuit)
MidNite Solar MNSPD-300-AC, 300 VAC lightning arrestor (for 120V/240V AC)
MidNite Solar MNSPD-300-DC, 300 VDC lightning arrestor (for off-grid, controler, combiner)
MidNite Solar MNSPD-600, 600 Vcc lightning arrestor (for grid-tie, combiner, inverter)
Fronius Symo 15.0-3 Lite, 15kW 208V 3-phase, single-MPPT, with AFCI, 4,210,052,841
Fronius Datamanager 2.0 WLAN GalSymPrim, 4,240,038,Z
Fronius sensor box, interface device for data collection, 4,240,104
Fronius sensor card retrofit, printed circuit board, 4,240,004,Z
Fronius sensor wind speed IG, 42,0411,0027
Fronius sensor ambient temperature, 43,0001,1188
Fronius sensor insolation/irradiance IG, 43,0001,1189
Fronius sensor module temperature, 43,0001,1190
Fronius plug for final communication, RJ45
Fronius 20 year extended warranty for Galvo
Fronius 20 year extended warranty for Primo
Fronius 20 year extended warranty for Symo
Fronius 20 year extended warranty for IG Plus
Clearance: Enphase ET-CLIP, cable guide clips, needed to fasten Enphase Engage cabling to racking or secure looped cabling (each)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8″ wide, KHSG-M, 100 ft roll
Kinetic KHSG-J stainless steel “J” hook for use with Squirrel Guard, 100 pack, 1 per foot needed
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
