Remember Me
2 Panel Cottage Kit (820 Watt PV) – 1600 Watt Inverter
4 Panel Cottage Kit (1,610 Watt PV) – 2400 Watt Inverter
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Midnite Solar MNPV6, 6-string combiner for 6 x 150 VDC breakers or 4 x 600 VDC fuse holders, NEMA-3R
Wohner 31110.000, midget fuse holder for DIN rail, 30A, 600 Volt AC or DC maximum, for combiners
Littelfuse JLLN200, 200A, 300V AC, 125V DC, class T fuse (bolts directly to battery terminal)
Littelfuse JLLN300, 300A, 300V AC, 125V DC, class T fuse (bolts directly to battery terminal)
Trojan T-105 6V battery, 225Ah/20h capacity, T2 technology, ELPT/stud terminals, 1 + 1 years warranty
Trojan L16E-AC 6V battery, 370Ah/20h capacity, T2 technology, L terminals, 1 + 1 years warranty
Trojan L16H-AC 6V battery, 435Ah/20h capacity, T2 technology, stud terminals, 1 + 1 years warranty
Trojan 6V-GEL battery, 6V deep cycle GEL, 189Ah/20h, stud terminals, 1 + 1 years warranty
Trojan 31-GEL battery, 12V deep cycle GEL, 102Ah/20h, L terminals, 1 + 1 years warranty
Inverter cables 2/0 AWG pair, flexible wire, red/black with 3/8″ lugs
Inverter cables 4/0 AWG pair, flexible wire, red/black with 3/8″ lugs
MidNite Solar Classic 150, MPPT charge controller, 150 VDC in, 96A out, 12 to 72V battery charging, PV – wind – hydro modes
MidNite Solar Classic 200, MPPT charge controller, 200 VDC in, 79A out, 12 to 72V battery charging, PV – wind – hydro modes
Magnum MS2024-L-U, a 2000W 24V pure sine inverter/charger, 60A PFC charger
Magnum MS4024-U, a 4000W 24V pure sine inverter/charger, 105A PFC charger
Magnum MS4024PAE, 4000W 24V pure sine inverter/charger, 105A PFC charger, 120V/240V output
Magnum MS4448PAE, a 4400W 48V pure sine inverter/charger, 60A PFC charger, 120V/240V output
Delta LA303 surge arrestor, 4-wire AC (for 120V or 240V split-phase)
MidNite Solar MNSPD-115, 115 Vcc lightning arrestor (for battery circuit)
MidNite Solar MNSPD-300-AC, 300 VAC lightning arrestor (for 120V/240V AC)
MidNite Solar MNSPD-300-DC, 300 VDC lightning arrestor (for off-grid, controler, combiner)
MidNite Solar MNSPD-600, 600 Vcc lightning arrestor (for grid-tie, combiner, inverter)
Fronius Symo 15.0-3 Lite, 15kW 208V 3-phase, single-MPPT, with AFCI, 4,210,052,841
Fronius Datamanager 2.0 WLAN GalSymPrim, 4,240,038,Z
Fronius sensor box, interface device for data collection, 4,240,104
Fronius sensor card retrofit, printed circuit board, 4,240,004,Z
Fronius sensor wind speed IG, 42,0411,0027
Fronius sensor ambient temperature, 43,0001,1188
Fronius sensor insolation/irradiance IG, 43,0001,1189
Fronius sensor module temperature, 43,0001,1190
Fronius plug for final communication, RJ45
Fronius 20 year extended warranty for Galvo
Fronius 20 year extended warranty for Primo
Fronius 20 year extended warranty for Symo
Fronius 20 year extended warranty for IG Plus
Clearance: Enphase ET-CLIP, cable guide clips, needed to fasten Enphase Engage cabling to racking or secure looped cabling (each)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Kinetic End Clamp – 38mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic End Clamp – 43mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
Kinetic End Clamp – 46mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
Kinetic End Clamp – 50mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8″ wide, KHSG-M, 100 ft roll
Kinetic KHSG-J stainless steel “J” hook for use with Squirrel Guard, 100 pack, 1 per foot needed
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Kinetic End Clamp – 50mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
Kinetic End Clamp – 46mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
Kinetic End Clamp – 43mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Kinetic End Clamp – 38mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Enviro Eco-Lawn seed mix, 10 lbs bag, environmentally friendly lawn: Less water, less fertilizing, less mowing.
Enviro Eco-Lawn seed mix, 25 lbs bag, environmentally friendly lawn: Less water, less fertilizing, less mowing.
Enviro Eco-Lawn seed mix, 50 lbs bag, environmentally friendly lawn: Less water, less fertilizing, less mowing.
Hardilawn lawn seed mix, 10 lbs bag, creates a lawn that stands up to high-traffic and kids
Hardilawn lawn seed mix, 25 lbs bag, creates a lawn that stands up to high-traffic and kids
Super Shade lawn seed mix, 10 lbs bag, for a great looking lawn even in the shady areas of your yard
Super Shade lawn seed mix, 25 lbs bag, for a great looking lawn even in the shady areas of your yard
Super Shade lawn seed mix, 50 lbs bag, for a great looking lawn even in the shady areas of your yard
White clover seed, 500 gram bag, for mixing into a lawn to create a self-fertilizing yard
Hardilawn lawn seed mix, 50 lbs bag, creates a lawn that stands up to high-traffic and kids
EPSolar – EPEver RTS300R47K3.81A, remote temperature sensor for XTRA, Tracer BN or A charge controllers
EP Solar MT50, remote control for Tracer BN or A series of charge controllers, LCD display, flush/surface mount, includes two meter communication cable
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each)
Inverter cables 1 AWG pair, flexible wire, red/black with 3/8″ lugs
Rennsteig CSC Multi-Function tool, cut – strip – crimp 10 AWG PV-Wire & MC4 connectors, 624 006 3 1 RT
Magnum Energy ME-MW-W, Wireless Web based monitoring kit for Magnum inverters and accessories.
Magnum Energy ME-MW-E, Ethernet based monitoring kit for Magnum Energy inverters and accessories
Magnum Energy BR-AC60S, breaker 60A AC, single pole
Magnum Energy BR-DC175, breaker 175A DC, front mount, 3/8 bolts
Magnum Energy MMP250-60S, Mini Magnum Panel enclosure with 250A DC breaker and 60A single pole AC input breaker
Magnum Energy MMP175-30D, Mini Magnum Panel enclosure with 175A DC breaker and 30A dual pole AC input breaker
Magnum Energy MMP175-60S, Mini Magnum Panel enclosure with 175A DC breaker and 60A single pole AC input breaker
Magnum Energy BP-MMP, Back Plate MMP, accommodates the MMP enclosure, a Magnum inverter, and the inverter hood together
Magnum Energy MP-HOOD, Panel Hood only (already included with panels MMP, MPSL, MPSH and MPDH)
MidNite Solar MNEPV, DC-rated breakers, 1 through 100 Amp available, 150 VDC rated, DIN rail mount breaker, 13mm & 26mm wide
Midnite Solar MNDC-GFP50-300, 50A 300 VDC GFI breaker, ground fault protector, DIN-rail mount
MidNite Solar MNDC-GFP63, 63A 150 VDC GFI breaker, DC ground fault protector, DIN rail mount
