-
Aluminum lay-in lug, tin-plated, 14 - 4 AWG, stainless set-screw & mounting hardware, cUL listed -
Copper lay-in lug, tin-plated, 14 - 4 AWG, stainless set-screw & mounting hardware, cUL listed -
Geocel 2300 Clear-in-Clear, crystal clear tri-polymer roof sealant, tube 10.3 fl. oz., good for 50 years under UV-exposure -
HellermannTyton 151-01699 stainless edge clip for PV-wires, securely holds 2 wires, pack of 100 -
HellermannTyton 151-02189 90-degree stainless edge clip for PV-wires, securely holds 2 wires, pack of 100 -
HellermannTyton 156-00468 stainless edge clip and 8" cable tie for solar PV, pack of 100, UV resistant for outdoor use -
HellermannTyton PA66UV 12" cable tie for solar PV, pack of 100, UV resistant for outdoor use, T50I0UVC2 (article no. 111-05256) -
HellermannTyton PA66UV 12" cable tie for solar PV, pack of 1000, UV resistant for outdoor use, T50I0UVM4 (article no. 111-00470)
-
Kinetic KAGMxx-G, adjustable ground Mount, available from 6 through 46 modules, 20-45-60-degree tilt-angle, for 60 & 72 cell modules in portrait, galvanized steel -
Kinetic KAGMM-G, micro-inverter mount for Hat Rail - steel ground mounts (each) -
Kinetic KBFGML-GA, fixed ground mount, 40-degree, landscape, 60 & 72 cell modules, galvanized steel -
Kinetic KBFGMP-GA, fixed ground mount, 40-degree, portrait, 60 & 72 cell modules, galvanized steel -
Kinetic 4" steel roof mounting plate, includes stainless lag screws -
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10'8" to 21', holds between 3 to 6 solar panels depending on length (in portrait). -
Kinetic Aerocompact flat roof/ballasted racking 10-15-20 degrees -
Kinetc Edge Clip with Cable Tie, KCMT-1 (each) -
Kinetic End Clamp - 32mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each) -
Kinetic End Clamp - 32mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each) -
Kinetic End Clamp - 35mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
-
Kinetic End Clamp - 35mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
-
Kinetic End Clamp - 38mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-B (each)
-
Kinetic End Clamp - 38mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC38-M (each)
-
Kinetic End Clamp - 40mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
-
Kinetic End Clamp - 40mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
-
Kinetic End Clamp - 43mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-B (each)
-
Kinetic End Clamp - 43mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC43-M (each)
-
Kinetic End Clamp - 46mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-B (each)
-
Kinetic End Clamp - 46mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC46-M (each)
-
Kinetic End Clamp - 50mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-B (each)
-
Kinetic End Clamp - 50mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC50-M (each)
-
Kinetic Flashing Kit with two 4" self-drilling lag bolts, KFLK-42S (each) -
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each) -
Kinetic Welded Hanger Bolt 4" Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each) -
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each) -
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each) -
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each) -
Kinetic KHSG-J stainless steel "J" hook for use with Squirrel Guard, 100 pack, 1 per foot needed -
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8" wide, KHSG-M, 100 ft roll -
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each) -
Kinetic 3" "L" Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each) -
Kinetic 4" "L" Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
-
Kinetic Mid Clamp - 30 - 46mm BLACK - with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each) -
Kinetic Mid Clamp - 30 - 46mm - with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each) -
Kinetic Mid Clamp - 47 - 50mm BLACK - with K-Nut, bolt, and integrated WEEB, KMWC4750-BM (each)
-
Kinetic Mid Clamp - 47 - 50mm - with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
-
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each) -
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each) -
Kinetic KWN60P-G, 60° portrait awning frame for 60- or 72-cell modules, KWN60P-G (each) -
Solartech Universal "Z" bracket (set of 4) for mounting a single solar panel, fits all PV modules