Remember Me
Copper wire 10 AWG RW90, 600V 30A, stranded, black or red, for wet/dry locations (sold per foot)
Kinetic 3″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each)
Copper wire 8 AWG RW90, 600V 55A, stranded, black & red, for wet/dry locations (sold per foot)
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A
Copper wire 6 AWG RW90, 600V 75A, stranded, black or green (ground wire), for wet/dry locations (sold per foot)
2 AWG – 4/0 AWG welding cable, finely stranded copper, 600V, 130A – 260A, black or red (sold per foot)
Kinetic 4″ “L” Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
Kinetic Mid Clamp – 30 – 46mm – with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each)
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each)
Copper wire 12 AWG RW90, 600V 20A, stranded, black or red, for wet/dry locations (sold per foot)
QuickCable MAX Lug, tin-plated copper lug, 4 AWG through 4/0 AWG, 3/8″ hole, cUL listed
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each)
Kinetic End Clamp – 32mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each)
Kinetic Mid Clamp – 30 – 46mm BLACK – with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each)
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10’8″ to 21’4″, holds between 3 to 6 solar panels depending on length (in portrait).
Copper wire 4 AWG RW90, 600V 95A, stranded, black, for wet/dry locations (sold per foot)
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each)
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector
Blue Sea MRBF terminal fuse, 40 – 300 Amp, 58 Volt max.
Kinetic Welded Hanger Bolt 4″ Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each)
Kinetic End Clamp – 32mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each)
MidNite Solar MNEPV, DC-rated breakers, 1 through 100 Amp available, 150 VDC rated, DIN rail mount breaker, 13mm & 26mm wide
Aluminum lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
Kinetic End Clamp – 35mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
Multi-Contact 32.0716 PV-BVK4, sealing cap for MC4 female
Multi-Contact 32.0717 PV-SVK4, sealing cap for MC4 male
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each)
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each)
Kinetic End Clamp – 40mm – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each)
Rolls-Surrette S6 L16-HC (previously S-550), 6V deep-cycle flooded lead-acid, 445Ah/20h capacity, group L16, 3 years warranty
Victron SmartSolar MPPT, MPPT charge controller, with Bluetooth, 12 – 48 VDC out, 75 – 250 VDC max. in, CSA-listed
MEGA-fuse 60A – 500A, 32V DC, MEGA bolt-down fuse
Kinetc Edge Clip with Cable Tie, KCMT-1 (each)
Copper lay-in lug, tin-plated, 14 – 4 AWG, stainless set-screw & mounting hardware, cUL listed
MRBF fuse holder for battery terminal mounting, 58V DC, 30 – 300 Amp
Battery interconnect 2/0 AWG, flexible wire with 3/8″ lugs
Kinetic Mid Clamp – 47 – 50mm – with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
Battery interconnect 4/0 AWG, flexible wire with 3/8″ lugs
Multi-Contact 32.0018 PV-AZB4, MC4 Y-connector, (1) male / (2) female, 1500V, 50A
Kinetic End Clamp – 40mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
Trojan T-105 6V battery, 225Ah/20h capacity, T2 technology, ELPT/stud terminals, 1 + 1 years warranty
Kinetic End Clamp – 35mm Black – with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each)
1/0 AWG, 2/0 AWG & 4/0 AWG DLO flexible wire, finely stranded tinned copper, CSA listed, black, 1000 Volt (sold per foot)
Battery interconnect 1 AWG, flexible wire with 3/8″ lugs
Compaselect HydroVolt battery hydrometer, a great hydrometer for a very modest price
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8″ wide, KHSG-M, 100 ft roll
Enphase 12 AWG Q Cable, 1.3-2.3m (4.2-7.5ft), for 60- and 72-cell modules in portrait or landscape
Kinetic KHSG-J stainless steel “J” hook for use with Squirrel Guard, 100 pack, 1 per foot needed
Precision Circuits 00-10041-260, Battery Isolator Manager, 225 Amp, intelligent lithium-ion enabled battery isolator
Victron SmartShunt 500-1000-2000A/50mV, Bluetooth battery monitor
Multi-Contact PV-MS, MC4 key for assembling and unlocking MC4 connectors
Victron BMV-712, smart battery monitor with shunt, 6.5 – 95 Volt, with Bluetooth communication, BAM030712X00
Overstock: Enerwatt WPL24, 12V deep cycle Lithium-ion battery, 88 Ah, 2500+ cycles, group 24, 3 years warranty
White clover seed, 500 gram bag, for mixing into a lawn to create a self-fertilizing yard
Geocel 2300 Clear-in-Clear, crystal clear tri-polymer roof sealant, tube 10.3 fl. oz., good for 50 years under UV-exposure
Kinetic 4″ steel roof mounting plate, includes stainless lag screws
Victron Orion-Tr Smart 12/12-30, DC-DC charger, 12V to 12V, 30A
