-
Copper wire 10 AWG RW90, 600V 30A, stranded, black or red, for wet/dry locations (sold per foot) -
Kinetic 3" "L" Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB3-MM (each) -
Copper wire 8 AWG RW90, 600V 55A, stranded, black & red, for wet/dry locations (sold per foot)
-
Copper wire 6 AWG RW90, 600V 75A, stranded, black or green (ground wire), for wet/dry locations (sold per foot) -
Multi-Contact MC4 female connector for 10 AWG PV-Wire, 32.0142P0001-UR, 1500V, 50A -
Multi-Contact MC4 male connector for 10 AWG PV-Wire, 32.0143P0001-UR, 1500V, 50A -
2 AWG - 4/0 AWG welding cable, finely stranded copper, 600V, 130A - 260A, black or red (sold per foot) -
Kinetic 4" "L" Bracket Kit, with K-Nut, S.S. Bolt, washer and lock washer, KLB4-M (each)
-
Kinetic Mid Clamp - 30 - 46mm - with K-Nut, bolt, and integrated bonding washer, KMWC3046-MM (each) -
Kinetic Top of Rail Accessory Clamp for Main Rail, KHRAC-MM (each) -
QuickCable MAX Lug, tin-plated copper lug, 4 AWG through 4/0 AWG, 3/8" hole, cUL listed -
Copper wire 12 AWG RW90, 600V 20A, stranded, black or red, for wet/dry locations (sold per foot)
-
Kinetic rail splice/joiner with integrated bonding washers, KJS2-MA (each) -
Kinetic Mid Clamp - 30 - 46mm BLACK - with K-Nut, bolt, and integrated WEEB, KMWC3046-BM (each) -
Kinetic Solar Rapid One Rail, KRAPID1-XX-M (each), from 10'8" to 21'4", holds between 3 to 6 solar panels depending on length (in portrait). -
Kinetic End Clamp - 32mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-M (each) -
Aluminum lay-in lug, tin-plated, 14 - 4 AWG, stainless set-screw & mounting hardware, cUL listed -
Kinetic Ground Lug Mount (K-Nut) with Ground Lug, KHGLUG-M (each) -
Copper wire 4 AWG RW90, 600V 95A, stranded, black, for wet/dry locations (sold per foot) -
Blue Sea MRBF terminal fuse, 40 - 300 Amp, 58 Volt max. -
Custom MC4 extension wire, red or black RPVU (PV-Wire), with or without MC4 connectors on ends, $1.50 per foot & $5 per MC4 connector -
Kinetic Rhino Mount, for steel roofs, with self-drilling screws, KHRT25-M (each) -
Kinetic Welded Hanger Bolt 4" Lag & 1 1/4 Hex Bolt with neoprene gasket & hardware, KHHB-4 (each) -
MidNite Solar MNEPV, DC-rated breakers, 1 through 100 Amp available, 150 VDC rated, DIN rail mount breaker, 13mm & 26mm wide -
Kinetic End Clamp - 32mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC32-B (each) -
Kinetic WEEB Bonding clip for Kinetic Rails and Joiner, KSR-WEEB (each) -
Kinetic End Clamp - 35mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-M (each)
-
Multi-Contact 32.0716 PV-BVK4, sealing cap for MC4 female -
Multi-Contact 32.0717 PV-SVK4, sealing cap for MC4 male -
Kinetic End Clamp - 40mm - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-M (each)
-
Kinetic Rapid One Rail End cover Plate Black Anodized sold with screw, KRCP-B (each) -
Kinetc Edge Clip with Cable Tie, KCMT-1 (each) -
MEGA-fuse 60A - 500A, 32V DC, MEGA bolt-down fuse -
Rolls-Surrette S6 L16-HC (previously S-550), 6V deep-cycle flooded lead-acid, 445Ah/20h capacity, group L16, 3 years warranty (minimum order qty.) -
Copper lay-in lug, tin-plated, 14 - 4 AWG, stainless set-screw & mounting hardware, cUL listed -
MRBF fuse holder for battery terminal mounting, 58V DC, 30 - 300 Amp -
Battery interconnect 2/0 AWG, flexible wire with 3/8" lugs -
1/0 AWG, 2/0 AWG & 4/0 AWG DLO flexible wire, finely stranded tinned copper, CSA listed, black, 1000 Volt (sold per foot) -
Kinetic Mid Clamp - 47 - 50mm - with K-Nut, bolt, and integrated bonding washer, KMWC4750-MM (each)
-
Battery interconnect 4/0 AWG, flexible wire with 3/8" lugs
-
Trojan T-105 6V battery, 225Ah/20h capacity, T2 technology, ELPT/stud terminals, 1 + 1 years warranty -
Kinetic End Clamp - 40mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC40-B (each)
-
Kinetic End Clamp - 35mm Black - with K-Nut, S.S. Bolt, Washers and Lock Washers, KEC35-B (each)
-
Kinetic KHSG-M Squirrel Guard, black PVC coated wire mesh 8" wide, KHSG-M, 100 ft roll -
Kinetic micro-inverter mounting kit, short & long versions, side-of-rail mounted, KHMNx-MA (each) -
Battery interconnect 1 AWG, flexible wire with 3/8" lugs
-
Geocel 2300 Clear-in-Clear, crystal clear tri-polymer roof sealant, tube 10.3 fl. oz., good for 50 years under UV-exposure -
Kinetic KHSG-J stainless steel "J" hook for use with Squirrel Guard, 100 pack, 1 per foot needed -
Compaselect HydroVolt battery hydrometer, a great hydrometer for a very modest price -
Precision Circuits 00-10041-260, Battery Isolator Manager, 225 Amp, intelligent lithium-ion enabled battery isolator -
Enphase 12 AWG Q Cable, 1.3-2.3m (4.2-7.5ft), for 60- and 72-cell modules in portrait or landscape -
Kinetic Flashing Kit with four 1/4" x 2" self-drilling screws, KFLK-44S (each) -
Multi-Contact PV-MS, MC4 key for assembling and unlocking MC4 connectors -
Victron SmartShunt 500-1000-2000A/50mV, Bluetooth battery monitor -
Victron BMV-712, smart battery monitor with shunt, 6.5 - 95 Volt, with Bluetooth communication, BAM030712X00 -
Southwire 58367003 PV-Wire, 2kV, 10 AWG, RPVU90 XLPE, Black, 500 foot spool -
Victron VE.Direct Cable, 1 through 30 feet available -
Sale!
Clearance: Enerwatt WPL24, 12V deep cycle Lithium-ion battery, 88 Ah, 2500+ cycles, group 24, 1 year warranty -
White clover seed, 500 gram bag, for mixing into a lawn to create a self-fertilizing yard -
Midnite Solar MNEAC, 120 VAC, DIN rail mount breaker (13mm), 10 through 60 Amp, ETL listed in US and Canada